tuf-kote® 4050 THERMOLAC, Heat Resistant Engine Coating Spray for Car, TRANSPARENT

• THERMOLAC 4050 Engine Coating leaves a hard, clear transparent film, and is heat resistant upto 200°C. It gives a shiny and clean film which facilitates visual inspection of metal surfaces, reading of labels, numbers etc.
• THERMOLAC 4050 Engine coating has a good adhesion and flexibility on rubber and plastic parts at both high and low temperatures. Has a very short drying time and is designed to be sprayed on surfaces exposed to both high and low temperatures
• PLEASE NOTE: THE PRODUCTS WILL/CAN ONLY BE SHIPPED BY SURFACE MODE. PLEASE ALLOW 5-10 DAYS FOR DELIVERY DEPENDING ON YOUR LOCATION.

Clear Transparent - Rust Protection Product Description TS4050 - Engine Coating leaves a hard, clear transparent film, that is heat resistant up to 200°C. It gives a shiny and clean film that facilitates visual inspection of metal surfaces, reading of labels, numbers, etc. TS4050 - Engine coating has good adhesion and flexibility on rubber and plastic parts at both high and low temperatures. Has a very short drying time and is designed to be sprayed on surfaces exposed to both high and low temperatures. Application Procedure TS4050 - Engine Coating should be applied on a clean and dry surface. Hold the can about 15-25 cm. from the surface, depress the valve head fully, and spray in a stroking motion [left-right or up-down] to avoid dripping and extra deposit. Repeat the procedure depending on the thickness of the film required, after a few minutes allow the base film to dry. Shake well before use, when the agitator ball is loosened continue shaking for about two minutes before using. Clean the spray head after use, turn the can upside down, and spray to empty the valve. If the nozzle clogs clean it with solvent.